To solve the beeping issue with your Hikvision camera, there are solutions you can try. • Network disconnected. To fix the issue, log in via the DVR/NVR local interface, and go to. * GU13 version: Menu->System Configuration-> Exception. . * GUI4 version: Configuration->Event->Basic Event-> Exception Go through the dropdown list of exception Add Cameras to Favorites on Device List Page ; Add Cameras to Favorites During Live View; Remove Cameras from Favorites; Share Device. Share a Single Device; Share Multiple Devices in a Batch; Silenced Mode for Devices Shared by Others; Live View. Start and Stop Live View; Set Window Division; Digital Zoom; PTZ Control. Pan and Tilt a Camera Example: If you have one IP camera with the main stream of 6144 kbps and another with the sub stream of 1024 kbps, the required IP camera bandwidth would be. Required Bandwidth = 1 * 6144 kbps + 1 * 1024 kbps =7168 kbps = 7.168 Mbps. Since the bandwidth calculation of IP cameras would be too overwhelming, you can view the below IP camera On the Hikvision NVR, you can configure the HDDs and cameras into groups either via the local monitor (directly) on the NVR or via the iVMS-4200 software. Setting up Hard Disk Group directly via the NVR. Step 1. Setting the NVR using the local monitor, the path should be from the NVR Menu, select “HDD” then select “Advanced”. Alternatively, If you need different schedules for the other cameras, then just click "Apply", which will save your new schedule for that camera. Step 5: In the "Copy to" window, use the tick boxes to specify the channel assigned to each of the cameras to which you would like to copy your new schedule. Check the camera web GUI Video/Audio tab to see which has been selected. I'd speculate that it's h.265+ which is an extension to h.265 that is proprietary to Hikvision. Suggestion : Temporarily change the camera codec to h.265 and see if Power Director handles it. Thank you for the reply. If you login to the camera with a browser and go to Configuration > Image > Display Settings > Day/Night Switch and click the Day/Night Switch dropdown to change it from auto to scheduled-switch, once this is selected you can set when the camera switches in and out of IR mode and once you have those times set to what you want you can click save RDf8o0.

hikvision cctv camera settings